316L Surgical Steel Curved Claw Fake Plug
- Gauge (Thickness): 16 (1.2mm)
- Material: 316L surgical grade stainless steel
- Type: fake plug
- -: priced and sold in pairs
- -: Made In USA
Click on the picture to see a big picture and description of the body jewelry you are interested in. |
Acrylic spiral plug, 8 ga
Acrylic spiral plug, 8 ga
- Length: 3/8" (10mm)
- Gauge (Thickness): 8 (3.2mm)
- Material: acrylic
- Type: plug
- -: priced and sold in pairs
|
Acrylic spiral plug, 0 ga
Acrylic spiral plug, 0 ga
- Length: 3/8" (10mm)
- Gauge (Thickness): 0 (8.0mm)
- Material: acrylic
- Type: plug
- -: priced and sold in pairs
|
Pair Of Fake Paved Plugs, 16GA
Pair Of Fake Paved Plugs, 16GA
- Length: 5/16" (8mm)
- Gauge (Thickness): 16 (1.2mm)
- Material: 316L surgical grade stainless steel
- Type: fake plug
- -: priced and sold in pairs
|
6 gauge cubic zirconia plug
6 gauge cubic zirconia plug
- Length: 1/2" (13mm)
- Gauge (Thickness): 6 (4.0mm)
- Material: cubic zirconia
- Type: plug
- -: O-rings included
- -: priced and sold in pairs
|
Quotes from Piercing FAQ
Prince's Wand The Prince's Wand / Urethral Tube is made in designs to fit either PA, Ampallang or Apadravya. It consists of an 8 or 10mm stainless steel tube, 3» - 4.5» long, bored through from end to end, the inner end tapered and rounded, with the outer end internally threaded to take a short SS ball-ended threaded stud which is used to guide insertion and removed for urination. The tube is worn in the urethra and is kept in place by a ball-ended stud worn through the piercing(s) and screwed into the Wand.
|
Catalog
Rings and Barbells
Studs & Screws
Retainers & Expanders
Type Piercing
Material
Special
|